Popular searches

Configurator

07Grassland combination · BROADCAST SEEDING · folding

GÜTTLER® GreenMaster 600 / 750 / 800 Grassland combination

GÜTTLER GreenMaster 600 with Ripperboard QUATTRO and pneumatic seeder, cut-out
Working width
6.00–8.00m
Transport width
3.00m
Seed tank
410 | 640l
Weight of basic machine
from 1,250kg

The all-round machine for grassland.

6.00, 7.50 or 8.00 m working width, hydraulically folding to 3.00 m – for maintenance, overseeding and reseeding, solo or with Mayor, Master or OffSet®.

Configure GreenMaster: GreenMaster 600 Request advice

Priceon request – Quotation from your GÜTTLER sales representative – the contact responsible for your postcode will get in touch with you. Brochure · PDF, 6.6 MB

Benefits · 8 highlights

For the highest demands.

The modular overseeder for medium-sized farms and shared use: GreenMaster harrow, EPS 5 pneumatic seeder and – coupled behind – the Mayor, Master or OffSet® Prismenwalze® (prism roller). Levelling, combing out thatch, aerating, overseeding and rolling in a single pass.

“The first grassland harrow that effectively controls rough meadow-grass.”

GÜTTLER

Levelling, aerating, sowing, rolling. In a single pass.

  • GÜTTLER GreenMaster 600 with Ripperboard QUATTRO, pneumatic seeder and coupled Prismenwalze® behind the tractor in a green meadow
    01 Pass

    Maintenance and overseeding in a single pass

    Harrow, seeding equipment and roller in a single pass: if you harrow first and then roll separately, the brochure example of 75 ha of grassland maintenance takes 40 hours instead of 22.

  • Ripperboard QUATTRO in front of the harrow tines of the GreenMaster 600 on grassland, with the coupled Prismenwalze® behind
    02 Ripperboard

    Dethatched with Ripperboard QUATTRO

    3.75 cmtine spacing with Ripperboard QUATTRO

    The Ripperboard QUATTRO doubles the number of tines and halves the tine spacing. It dethatches intensively, tackles rough meadow-grass effectively and levels molehills – while keeping the design compact.

  • GÜTTLER GreenMaster 600 with pneumatic seeder used solo on the rear of the tractor, without a trailed roller, during grassland maintenance
    03 Modular system

    Unhitch the roller, harrow solo

    To control rough meadow-grass, unhitch the roller and harrow aggressively crosswise several times on its own – fast and manoeuvrable, and the combed-out meadow-grass lies loose on the surface. The harrow also works solo at the rear.

  • GreenMaster 750 with pneumatic seeder on uneven grassland: the long harrow tines on the side wing follow the ground, with the coupled Master roller behind
    04 Ground contouring

    Follows every contour

    The booms adapt to the contour from −3° to +22.5°, and 480 mm long tines follow every unevenness. The hydraulic pressure compensation distributes the weight of the seeding unit and roller onto the side wings.

  • GreenMaster 600 with Ripperboard QUATTRO turning in the meadow, with the Mayor Prismenwalze® following in an arc
    05 Sward protection

    Turning without friction damage

    almost 90°steering angle of the coupled roller

    The pivot point is behind the harrow and guides the roller along behind it. All prism rings are in line – even at extreme steering angles there is no friction damage and the sward stays intact.

  • Folded GreenMaster with pneumatic seeder in transport position on the tractor in the yard, roller hitch on the left
    06 Coupling kit

    One spool valve for everything

    Mayor or Master hang in the coupling frame, and the roller’s hydraulics and lighting are coupled to the GreenMaster. With the PREMIUM coupling kit, a single double-acting spool valve is enough – you select the function from the cab.

  • EPS 5 pneumatic seeder on the GreenMaster 600 with Ripperboard QUATTRO on the tractor, with the coupled Mayor Prismenwalze® behind
    07 Seeding equipment

    Precise sowing up to 640 litres

    BROADCAST SEEDING, proven since 2005: the EPS 5 pneumatic seeder with 410 or 640 litres places the seed between the harrow tines. Easy to calibrate, with the seed rate set in fine steps – with SeedProfi if required.

  • GreenMaster with pneumatic seeder undersowing grass in maize at the 6-leaf stage
    08 All year round

    Also in maize and on arable land

    With the row crop conversion kit, you can drill undersown crops into maize. Plus catch crop sowing, working maize stubble to control the corn borer and seedbed preparation with the roller.

3 versions · 12 types

6.00, 7.50 or 8.00 metres.

Three working widths with four types each – STANDARD or PREMIUM coupling kit, mechanical or hydraulic harrow adjustment. All fold to 3.00 m transport width.

GÜTTLER GreenMaster 600 with Ripperboard QUATTRO and pneumatic seeder, rendering

6.00 m · 2.40 m + 2 × 1.80 m

GreenMaster 600

  • 6.00 m
  • 4 types
  • from 1,250 kg

6.0 metres folding for grassland maintenance, overseeding and reseeding – the pneumatic seeder with either an electric or hydraulic fan.

  • Transport width 3.00 m, transport height 3.10 m
  • Levelling bar 600 or Ripperboard 600 QUATTRO
  • Pneumatic seeder 410 litres electric or hydraulic, 640 litres hydraulic
Technical data: GreenMaster 600 Configure: GreenMaster 600
GÜTTLER GreenMaster 750 with Ripperboard QUATTRO and pneumatic seeder, rendering (illustration similar)

7.50 m · 2.40 m + 2 × 2.55 m

GreenMaster 750

  • 7.50 m
  • 4 types
  • from 1,390 kg

7.5 metres folding for grassland maintenance, overseeding and reseeding – the pneumatic seeder with hydraulic fan. Illustration similar.

  • Transport width 3.00 m, transport height 3.85 m
  • Levelling bar 750 or Ripperboard 750 QUATTRO
  • Pneumatic seeder 410 or 640 litres, hydraulic
Technical data: GreenMaster 750 Configure: GreenMaster 750
GÜTTLER GreenMaster 800 with Ripperboard QUATTRO and pneumatic seeder, rendering (illustration similar)

8.00 m · 3-section frame

GreenMaster 800

  • 8.00 m
  • 4 types
  • from 1,430 kg

8.0 metres folding for grassland maintenance, overseeding and reseeding – the largest working width, the pneumatic seeder with hydraulic fan. Illustration similar.

  • Transport width 3.00 m, transport height 4.15 m
  • Levelling bar 800 or Ripperboard 800 QUATTRO
  • Pneumatic seeder 410 or 640 litres, hydraulic
Technical data: GreenMaster 800 Configure: GreenMaster 800

Technology · 3 versions · 12 types

Technical data. All 12 types.

Choose the working width and coupling kit – the key figures, width comparison and data table adjust accordingly.

GÜTTLER GreenMaster 600 with Ripperboard QUATTRO and pneumatic seeder, rendering

GreenMaster 600

6.00 m · 2.40 m + 2 × 1.80 m

Working width

Type 600 STANDARD mech.

Working width
6.00m
Transport height
3.10m
Weight of basic machine
1,250kg
Hydraulics
2 × DA
Harrow
2 rows of NonStop spring tines Ø 12 mm, tine spacing 75 mm
Frame
3-section, hydraulic folding with pressure compensation
Mounting
Cat. 2 and 3 headstock
Gauge wheels
4 double gauge wheels
Trailed roller
Mayor or Master with Cat. 2 hitch; OffSet® with drawbar extension
Hydraulic fan
additionally 1 × SA and pressure-free return

GreenMaster 600 / 750 / 800 technical data

GreenMaster 600 · 4 types
TypeVersionWorking widthTransport widthWeight of basic machineTransport heightHydraulics
600 STANDARD mech.6006.00m3.00m1,250kg3.10m2 × DA
600 PREMIUM mech.6006.00m3.00m1,260kg3.10m1 × DA
600 STANDARD hydr.6006.00m3.00m1,305kg3.10m3 × DA
600 PREMIUM hydr.6006.00m3.00m1,310kg3.10m1 × DA
750 STANDARD mech.7507.50m3.00m1,390kg3.85m2 × DA
750 PREMIUM mech.7507.50m3.00m1,400kg3.85m1 × DA
750 STANDARD hydr.7507.50m3.00m1,445kg3.85m3 × DA
750 PREMIUM hydr.7507.50m3.00m1,450kg3.85m1 × DA
800 STANDARD mech.8008.00m3.00m1,430kg4.15m2 × DA
800 PREMIUM mech.8008.00m3.00m1,440kg4.15m1 × DA
800 STANDARD hydr.8008.00m3.00m1,485kg4.15m3 × DA
800 PREMIUM hydr.8008.00m3.00m1,490kg4.15m1 × DA

Type = GreenMaster harrow 600 / 750 / 800 with STANDARD or PREMIUM coupling kit and mechanical (mech.) or hydraulic (hydr.) harrow adjustment. Weight of the basic machine without accessories and pneumatic seeder; transport height with 0.25 m ground clearance; hydraulics = required double-acting connections. Technical data: as of 2026. Illustrations are not binding. Errors excepted, subject to technical changes.

GÜTTLER GreenMaster with pneumatic seeder and coupled Mayor Prismenwalze® during grassland maintenance in a hilly meadow

Applications

Maintain grassland. Drill arable land.

For grassland maintenance, overseeding and reseeding – and in arable farming for catch crop sowing, undersowing maize and seedbed preparation with the coupled roller.

Suitable soils

Medium soils
often ready for drilling with the GreenMaster and roller alone
Heavy clay soils
after suitable preparation, the combination provides the “finishing touch” to the seedbed
  1. 01

    Spring: maintenance

    Close gaps, level molehills and mouse mounds, stimulate tillering and spread slurry films.

  2. 02

    Summer: renovation

    Comb out rough meadow-grass and make room for seed: unhitch the roller, harrow crosswise several times, rake into swaths and remove.

  3. 03

    Autumn: overseeding

    Build up the seed potential in the soil and encourage gaps to close naturally – with harrow and roller coupled again.

  4. 04

    Arable farming

    Sow catch crops, drill undersown crops into maize, work maize stubble to control the corn borer and roll frost-heaved crops.

Equipment

Standard and optional equipment.

What every GreenMaster 600 / 750 / 800 comes with from the factory – and how you can add to the harrow, seeding equipment and roller coupling.

Standard equipment 10 items

  • Working width 6.00 / 7.50 / 8.00 m, transport width 3.00 m, transport height 3.10 / 3.85 / 4.15 m
  • 2 rows of NonStop spring tines Ø 12 mm, tine spacing 75 mm
  • Tine loss protection
  • Hydraulic folding with pressure compensation
  • 4 double gauge wheels
  • Cat. 2 and 3 headstock
  • Marker boards with LED lighting
  • Preparation for seeding equipment (bracket) for mounting the pneumatic seeder (automatically folding loading platform)
  • Parking stands for parking in transport and working position
  • STANDARD or PREMIUM coupling kit for trailed roller with Cat. 2 hitch – depending on type

Accessories 12 items

  • Ripperboard QUATTROFor grassland renovation: doubles the number of tines and halves the tine spacing to 3.75 cm. Dethatches intensively, levels molehills, adjustable in height and angle.Ripperboard 600 / 750 / 800 QUATTRO · 320 / 360 / 390 kgFitting approx. 1.0 h
  • Levelling barFor levelling molehills, parallelogram-guided: perfect ground contouring including overload protection, adjustable in height – an alternative to the Ripperboard.Levelling bar 600 / 750 / 800 · 250 / 290 / 300 kgFitting approx. 1.0 h
  • EPS 5 pneumatic seeder410 litres 90° with electric or hydraulic fan or 640 litres with hydraulic fan, on the standard bracket; for 640 litres with adapter plate.Electric fan GreenMaster 600 only · 90 to 130 kgfactory-fitted
  • SeedProfi Basic or HighTerminal with 5-inch colour display, electronically controlled seed shaft drive, daily and total area counting, seed rate increase or decrease in 5% steps. Basic for grass or small seeds, High for all seeds with fan speed and airflow monitoring.EPS 5 pneumatic seederfactory-fitted
  • PREMIUM coupling kit as a retrofitAll hydraulic functions of harrow and trailed roller via one control block: folding of harrow, roller and transport wheels, lifting of the ground drive wheel, hydraulic harrow adjustment – preselected on the control unit in the cab.Types with STANDARD coupling kit · 10 kg1 DA spool valve
  • Hydraulic harrow adjustmentThe harrow tines can be adjusted centrally from gentle to aggressive – hydraulically with the retrofit. One retrofit kit each for the PREMIUM and STANDARD coupling kits.Only types with mech. harrow adjustment · PREMIUM 50 kg · STANDARD 55 kg (plus 1 DA spool valve)Retrofitting approx. 4.0 h
  • Conversion kit for maintenance in row crops4 wheel legs including mounting, for undersowing in maize.All types · 85 kgfor self-assembly
  • Set of scrapers for the double gauge wheelsOne set per double gauge wheel – 4 sets are ordered per machine.All types · 8 kg per set
  • Air brake pass-through for the rollerRequired when a roller with air brakes is coupled to the GreenMaster.All types · 10 kg
  • Hydraulic lifting for the ground drive wheelFor the ground drive with angle gearbox – one version each for the STANDARD and PREMIUM coupling kits. With PREMIUM, lifting is controlled via the control block.Pneumatic seeder with ground drive · for self-assemblySTANDARD coupling kit: 1 × SA
  • Metering rollers8R3S (coarse) as standard for grass and catch crop mixtures; also 8R1L extra fine, 8R1R fine, 8R1S medium and 8R2B extra coarse. 8R1S D for fine seeds under 7 kg/ha is included with SeedProfi.EPS 5 pneumatic seeder
  • Further accessories for the pneumatic seederElectric seed rate adjustment – seed rate controllable from the tractor –, hectare counter with daily and total counter, TL 17 tank/airflow monitoring, tank monitoring and cover against the weather. Without a 7-pin socket: pulse wheel.EPS 5 pneumatic seederfor self-assembly

Standard equipment and accessories: as of 2026. Accessories and quotation from your GÜTTLER sales representative.

Configurator · GreenMasterLive preview
GÜTTLER GreenMaster with Ripperboard QUATTRO and 640 litre pneumatic seeder in the configurator side view

Illustration: folding GreenMaster with Ripperboard QUATTRO and 640 litre pneumatic seeder · configurator view

Configurator

Your GreenMaster. In four steps.

Choose the working width and coupling kit, put together the harrow accessories and pneumatic seeder, and send your enquiry with your postcode directly to the responsible GÜTTLER sales representative.

  1. 01
    Basic machine
    • 600 | 750 | 800
    • STANDARD · PREMIUM
    • mech. · hydr.
  2. 02
    Harrow accessories
    • Levelling bar
    • Ripperboard QUATTRO
    • Row crop conversion kit
  3. 03
    Pneumatic seeder
    • 410 | 640 litres
    • electric · hydraulic
    • SeedProfi
  4. 04
    Accessories & enquiry
    • Metering rollers
    • Hectare counter
    • with postcode to the sales team

Price on request – quotation from your GÜTTLER sales representative – the contact responsible for your postcode will get in touch with you.

Your selection GreenMaster 600

Configure GreenMaster: GreenMaster 600

Go to version

The Original Since 1978

Behind the GreenMaster rolls the Prismenwalze®. The Original since 1978.

The Prismenwalze® is the roller with the golden hoofprint® – the original from GÜTTLER, since 1978. Behind the GreenMaster it runs as a Mayor, Master or OffSet® trailed roller: it creates soil contact for the overseeding, stimulates the existing sward to tiller and presses frost-heaved swards back down.

Vigorous crops – reliable yields.

The Prismenwalze® principleThe whole story
Mayor Prismenwalze® in the foreground, with the GreenMaster 600 and pneumatic seeder on the tractor behind it in a mown meadow

Downloads · 8 files

Brochure, flyer, operating manual and more.

All brochures and manuals

Videos

GreenMaster 600 / 750 / 800 in action.

Knowledge & practice · 3 of 8 practical tips

GreenMaster 600 / 750 / 800 in practice.

All practical tips
  • GreenMaster tine seeding: seed tubes deliver the seed directly behind the harrow tinesAutumn
    • Grassland
    • Overseeding

    Grassland maintenance in autumn

    Late summer and autumn are the best time for overseeding: the intact sward remains and gaps are filled.

    Practical tip · August 2024

  • MAYOR with Ripperboard freeing capped wheatSpring
    • Cereals
    • GreenMaster

    Breaking crusts

    Crusted soils after winter: harrow and Prismenwalze® (prism roller) break the crust without damaging the plants.

    Practical tip · February 2024

Advice & dealers

Questions about the GreenMaster 600 / 750 / 800?

We will advise you on working width, coupling kit, harrow accessories and seeding equipment – and on the right roller. Your GÜTTLER sales representative can also put you in touch with the sales partner near you.

GreenMaster GreenMaster600 STANDARD mech. · 6.00 m
Configure: GreenMaster 600