Popular searches

Configurator

Service · Spare parts

Spare and wear parts. Through your dealer.

Spare parts catalogues are available in the protected dealer portal. As an end customer, you order through your GÜTTLER dealer – if you have any questions, our service team in Kirchheim/Teck will help.

Find a dealerCall service

For dealers: spare parts catalogues in the dealer portal

Close-up of the AVANT 56 Generation 5: Simplex Prismenwalze® in special cast iron with tined unit
AVANT 56 · Prismenwalze® and tined unit

Ordering

How to get your spare part.

For dealers

Spare parts catalogues in the dealer portal.

We offer our customers the option of downloading the spare parts catalogues they need directly from our dealer portal.

  1. Already registered and activated? Log in to the dealer portal with your personal access details.
  2. No access yet? Please complete the registration form in full – including your GÜTTLER customer number. You will receive email confirmation of your personal access shortly.
Log inRegister

For end customers

Ordering through your dealer.

Are you a GÜTTLER end customer and would like to place an order? Then please contact your dealer. If you have any questions, please feel free to contact our service team.

Find a dealerCall service

Your machine details are on the type plate; the machine number is stamped into the frame above the type plate.

Wear parts · As of 2026

Wear parts at a glance.

The most important wear parts with descriptions and dimensions – order them through your GÜTTLER dealer.

How the prism rings work together
GÜTTLER MEDIANA with Prismenwalze® Ø 33/38, cut-out

MEDIANA and Ø 33/38 roller units (including GreenMaster Compact)

Prism rings Ø 33/38

  • Long-hub prism ring Ø 33 cm
  • Long-hub prism ring Ø 33 cm with short hub – to take up lateral play when wear has increased
  • Short-hub prism ring Ø 38 cm
  • Outer ring Ø 33 cm
  • Long-hub prism ring Ø 33 cm Synthetic Ultra
  • Short-hub prism ring Ø 38 cm Synthetic Ultra
  • Shims 40 × 40 × 4 mm and 40 × 40 × 6 mm
GÜTTLER SIMPLEX Prismenwalze®, cut-out

Simplex (SX) and Duplex (DX) prism rollers – AVANT, DUPLEX®, SIMPLEX

SX/DX prism rings

  • SX/DX prism ring Ø 45 cm – also with shortened hub
  • SX/DX prism ring Ø 45 cm Synthetic Ultra
  • SX/DX prism ring Ø 50 cm Synthetic Ultra
  • SX/DX prism ring Ø 56 cm, split – 2 halves with bolts and nuts, also axially drilled
  • SX/DX prism ring Ø 56 cm Synthetic Ultra
  • Spacer sleeves 31, 34 and 105 mm with star profile, 44 mm elastic
  • Shim 45 × 45 × 3 mm, steel
UCF 308 flange bearing with dust cap, hole spacing 112 mmUCF 206 flange bearing with dust cap, hole spacing 83 mmUBFD 206 flange bearing with plastic spacer

Roller bearings

Flange bearings

  • UCF 308 flange bearing for Ø 40 mm shaft (hole spacing 112 mm) – matching dust cap available
  • UCF 206 flange bearing for Ø 30 mm shaft (hole spacing 83 mm) – matching dust cap available
  • UBFD 206 flange bearing – matching 6 mm plastic spacer available
  • DIN 7991 countersunk screws and lock nuts to suit the bearing
ASX scraper, spring-loaded, with clamp, cut-out

Scrapers, including for SX 56 Synthetic Ultra

ASX scrapers

  • ASX scraper, spring-loaded, with clamp
  • ASX scraper extension (complete kit)
  • ASX RRSU scraper for SX 56 Synthetic Ultra – with frame
  • ASX KE scraper for SX 56 Synthetic Ultra – for side mounting
  • ASX scraper plates 45, 50 and 60 mm for SX 56 Synthetic Ultra
  • ASX arc centring base, support tube holding arm, contact plates, T-pin Ø 17 × 155 mm
NonStop double tine of the GÜTTLER harrow with clamp, cut-out

GreenMaster, GreenMaster TINE SEED and Super Maxx®

Harrow + Ripperboard

  • NonStop double tine, cranked – for GreenMaster
  • NonStop double tine, cranked, with seed tube – for GreenMaster TINE SEED
  • NonStop single tine, cranked – for GreenMaster; left/right with seed tube for GreenMaster TINE SEED
  • NonStop single tine, straight – for Super Maxx®
  • NonStop clamps 40 × 40 and 60 × 60 mm, locking plates, tine fastening as a complete kit
  • Ripperboard tine spring and clamp
  • Ripperboard wear fingers 140 mm and LONG 240 mm
  • Tool brackets for Ripperboard UNO (110 mm) and QUATTRO (550 mm), tool clamp
  • Parallelogram links (overload protection)
  • Wear part for end scraper
Super Maxx® large spring tine with clamp, next to it the double-leaf helper spring, cut-outSwept point for the Super Maxx®, cut-out

Super Maxx® large spring tines

Spring tines & points

  • Large spring tine for Super Maxx® 45 × 12 × 550 mm
  • Double-leaf helper spring 45 × 10 mm and clamp for tines with double leaf spring
  • Narrow point (1 mounting hole)
  • 180 mm and 200 mm swept points (2 mounting holes)
  • Narrow point with tungsten carbide tip, 36 mm and 55 mm (1 mounting hole)
  • Forged point and precision point (2 mounting holes)
  • M10 point bolts – 45 mm oval-head point bolt with nut, 50 mm with backing plate and lock nut; 50 mm plough bolt

An M10 × 50 point bolt with backing plate and lock nut is recommended when 200 mm swept points are fitted to machines with single-hole tines.

AVANT 56 tined unit with spring tines, cut-out

Tined unit and FlatSpring as front implements, e.g. on AVANT and DUPLEX®

Tined unit & FlatSpring

  • KD 460 for tined unit 45 × 12 × 460 mm, with double-leaf helper spring
  • KK 460 for tined unit 45 × 12 × 460 mm
  • P 53-1 for tined unit 32 × 12 × 410 mm
  • P 54-1 for tined unit 32 × 12 × 420 mm
  • Clamps 80 × 50 mm or 32 × 12 mm, locking plate
  • Replacement points 40 × 6 × 200 mm and 40 × 6 × 215 mm
  • Spring leg for FlatSpring 80 × 10 × 516 mm, wear plate, clamp 80 × 10 mm

Matching fixings (bolts, lock nuts, split pins) are available for the parts. Errors excepted, subject to technical changes.

Downloads

Maintenance & documents.

Instructions and primers for the most important wear parts – all operating manuals under Downloads.

All operating manuals

Service hotline

Questions about spare parts?

If you have any questions, please feel free to contact our service team. By phone, WhatsApp or email – whichever suits you best.

Call serviceFind a dealer