Popular searches

Configurator

01Front press · DUPLEX® Prismenwalze®

GÜTTLER® DUPLEX® Front presses

GÜTTLER DUPLEX® 30-56 front press with two prism rollers and tined unit, cut-out
Working width
2.50–6.05m
Ø Prismenwalze®
45 | 56cm
Weight
from 740kg
Transport width, folding
2.80–3.00m

Maximum output on heavy soils.

Two prism rollers in break-proof special cast iron, mounted with an offset one in front of the other – for sandy to heavy soils, rigid or hydraulic folding.

Configure DUPLEX®: DUPLEX® 56 rigid Request advice

Priceon request – Quotation from your GÜTTLER sales representative – the contact responsible for your postcode will get in touch with you. Brochure · PDF, 7.3 MB

Benefits · 8 highlights

The clod crushers.

The DUPLEX® Prismenwalze® (prism roller) works its way through wet, heavy and extremely heavy soils that crumble poorly. Powerful, persistent and extremely robust – an active front implement instead of dead front ballast, and easy to steer without a steering hitch.

“Proven thousands of times over.”

GÜTTLER

Two rollers. One pass fewer.

  • DUPLEX® with two offset prism rollers and tined unit on the front of the tractor, rendering
    01 Self-cleaning

    Two rollers that clean each other

    2Prism rollers offset one in front of the other

    The two offset prism rollers clean each other – giving even heavy clay soils a loose, crumbly structure.

  • DUPLEX® 30-56 with tined unit working its way through coarse plough clods
    02 Furrow press alternative

    Breaks up heavy plough clods

    The DUPLEX® breaks up heavy plough clods and saves a pass – the alternative to a furrow press, with very good reconsolidation.

  • DUPLEX® 30-56, front-mounted, combined with a seed drill at the rear
    03 Working speed

    Made for high speed

    16 km/hworking speed possible

    The DUPLEX® is suitable for very high working speeds of up to 16 km/h – the DUPLEX® 56 is made for heavy tractors and high speed.

  • DUPLEX® 30-45 with tined unit in front of the tractor on ploughed, cloddy soil
    04 Fuel

    Work shallower, save fuel

    approx. 10%Fuel saved per cm less working depth

    The tractor rolls on a level, firm surface and barely leaves tracks. The power harrow can work shallower – 1 cm less depth saves approx. 10% fuel.

  • DUPLEX® 30-45 with tined unit crumbling the soil in front of the tractor
    05 Seedbed

    Fine soil in the seed zone

    A well-settled seedbed with more fine soil in the seed zone: more precise seed placement and a lower risk of winterkill.

  • DUPLEX® 30-56 with mounted tined unit and side plate, front-mounted
    06 Modular system

    Tined unit with 3 pins

    3pins to fit and remove

    The headstock is designed so that the tined unit can be fitted and removed with just 3 pins – it can be retrofitted at any time, and the roller also works solo.

  • DUPLEX® 420-45 folding, front-mounted, carrying the front tank for maize drilling
    07 Axle loads

    Carries the front tank

    Without the tined unit, a front tank for fertiliser or seed can rest on the DUPLEX® – so the tractor only loads the soil with its unladen weight while working.

  • DUPLEX® from the front: headstock, prism rollers in special cast iron and tined unit in front of the tractor
    08 Material

    Break-proof special cast iron

    Ø 56cm · bolted half-rings

    Ø 56 cm break-proof special cast iron with bolted half-rings: a secure fit, even after many years, and easy to service. The bearing plates are embossed and double-walled.

4 versions · 13 types

Ø 45 or 56. Rigid or folding.

Four versions with 13 types – roller diameter and working width depend on your soils and your tractor.

GÜTTLER DUPLEX® rigid with tined unit, rendering

Ø 45 cm · rigid

DUPLEX® 45 rigid

  • 2.57⁠–⁠2.92 m
  • 2 types
  • from 740 kg

The massive Prismenwalze® for medium to extremely heavy soils – 2.5 to 3.0 metres, rigid frame.

  • Cultivator tined unit or FlatSpring for levelling
  • Front and rear scrapers can be retrofitted
  • Marker boards with LED lighting for self-assembly
Technical data: DUPLEX® 45 rigid Configure: DUPLEX® 45 rigid
GÜTTLER DUPLEX® 30-56 rigid with tined unit, rendering

Ø 56 cm · rigid

DUPLEX® 56 rigid

  • 2.50⁠–⁠4.04 m
  • 3 types
  • from 830 kg

For heavy tractors and high speed – for light to extremely heavy soils, 2.5 to 4.0 metres, rigid.

  • Cultivator tined unit up to 4.00 m working width
  • FlatSpring for DX 30-56
  • Front and rear scrapers can be retrofitted
Technical data: DUPLEX® 56 rigid Configure: DUPLEX® 56 rigid
GÜTTLER DUPLEX® 45 hydraulic folding, unfolded, rendering

Ø 45 cm · hydraulic folding

DUPLEX® 45 folding

  • 4.10⁠–⁠6.00 m
  • 4 types
  • 2.80⁠–⁠3.00 m transport

4.1 to 6.0 metres for medium to extremely heavy soils – folds hydraulically to a transport width of 2.80 to 3.00 metres.

  • FlatSpring with hydraulic angle adjustment
  • Steering hitch for heavy conditions (cannot be retrofitted)
  • 20 cm headstock extension
Technical data: DUPLEX® 45 folding Configure: DUPLEX® 45 folding
GÜTTLER DUPLEX® 610-56 hydraulic folding with 3.00 m centre section, unfolded, rendering

Ø 56 cm · hydraulic folding

DUPLEX® 56 folding

  • 4.10⁠–⁠6.05 m
  • 4 types
  • 2.80⁠–⁠3.00 m transport

4.1 to 6.1 metres for light to extremely heavy soils – the largest DUPLEX® for heavy tractors and high speed.

  • FlatSpring with hydraulic angle adjustment
  • Steering hitch for heavy conditions (cannot be retrofitted)
  • All types also available with a 1.80 m or 3.00 m centre section – on request
Technical data: DUPLEX® 56 folding Configure: DUPLEX® 56 folding

Technology · 4 versions · 13 types

Technical data. All 13 types.

Choose the version and working width – the key figures, width comparison and data table adjust accordingly.

GÜTTLER DUPLEX® 30-56 rigid with tined unit, rendering

DUPLEX® 56 rigid

Ø 56 cm · rigid

Working width

Type DX 30-56

Working width
2.86m
Transport width
3.00m
Weight
1,050kg
Prism rings
28
Prismenwalze®
Special cast iron
Mounting
Cat. 2 headstock, front-mounted
Hydraulics
1 × DA spool valve (folding), FlatSpring + 1 × DA
Working speed
up to 16 km/h
Tined unit
Cultivator, 3-row, 150 mm tine spacing

DUPLEX technical data®

DUPLEX® 56 rigid · 3 types
TypeVersionWorking widthTransport widthWeightØ rollerPrism ringsDesign
DX 27-4545 rigid2.57m2.70m740kg45cm26rigid
DX 30-4545 rigid2.92m3.00m785kg45cm30rigid
DX 26-5656 rigid2.50m2.64m830kg56cm24rigid
DX 30-5656 rigid2.86m3.00m1,050kg56cm28rigid
DX 41-5656 rigid4.04m4.20m1,300kg56cm39rigid
DX 420-4545 folding4.10m3.00m1,470kg45cm403.00 m + 2 × 0.60 m, hydr. folding
DX 460-4545 folding4.60m3.00m1,570kg45cm463.00 m + 2 × 0.80 m, hydr. folding
DX 510-4545 folding5.00m2.80m1,705kg45cm501.80 m + 2 × 1.60 m, hydr. folding
DX 610-4545 folding6.00m2.80m1,960kg45cm601.80 m + 2 × 2.10 m, hydr. folding
DX 420-5656 folding4.10m3.00m1,820kg56cm403.00 m + 2 × 0.60 m, hydr. folding
DX 460-5656 folding4.60m3.00m1,930kg56cm443.00 m + 2 × 0.80 m, hydr. folding
DX 510-5656 folding5.05m2.80m2,410kg56cm481.80 m + 2 × 1.60 m, hydr. folding
DX 610-5656 folding6.05m2.80m2,740kg56cm561.80 m + 2 × 2.10 m, hydr. folding

Weight of the basic machine without front implement. Technical data: as of 2026. Illustrations are not binding. Errors excepted, subject to technical changes.

DUPLEX® 30-56, front-mounted, during maize drilling, with the monograin drill at the rear

Applications

In use all year round.

The aggressive front implement can be used flexibly all year round: the soil is levelled, crumbled and reconsolidated before the tractor even drives over it.

Suitable soils

DUPLEX® 45
for medium to extremely heavy soils
DUPLEX® 56
for light to extremely heavy soils – for heavy tractors and high speed
  1. 01

    Spring drilling

    For drilling spring cereals, sugar beet, maize or vegetables in spring.

  2. 02

    Autumn drilling

    For oilseed rape or winter cereals in autumn – drilling in a single pass after ploughing or deep cultivation.

  3. 03

    Solo and at the rear

    Remove the tined unit and the rollers also work at the rear, for example for rolling after sowing or behind the power harrow.

  4. 04

    Rolling down and breaking crusts

    Used solo, the DUPLEX® rolls down catch crops and breaks crusts on capped seedbeds.

Front implement selector

Which GÜTTLER front press suits your soil – depending on how the soil breaks up when ploughed.

  • AVANT 45
    • Sandy soils
    • Medium soils
  • AVANT 56
    • Drifting sand
    • Sandy soils
    • Medium soils
  • DUPLEX® 45
    • Sandy soils
  • DUPLEX® 45 with tined unit
    • Medium soils
    • Clay soils
  • DUPLEX® 56
    • Drifting sand
    • Sandy soils
    • Medium soils
  • DUPLEX® 56 with tined unit
    • Clay soils
Front pressesDrifting sandploughed without front press · loose and friableSandy soilsloose and friableMedium soilscloddyClay soilsvery cloddy
AVANT 45––
AVANT 56–
DUPLEX® 45–––
DUPLEX® 45 with tined unit––
DUPLEX® 56–
DUPLEX® 56 with tined unit–––

Based on the GÜTTLER front implement selector, as of 2026.

Equipment

Standard and optional equipment.

What every DUPLEX® comes with from the factory – and how you can equip it for your soils and for the road.

Standard equipment 4 versions

  • DUPLEX® 45 rigid

    • DUPLEX® Prismenwalze® special cast iron Ø 45 cm
    • Cat. 2 headstock for front mounting

  • DUPLEX® 56 rigid

    • DUPLEX® Prismenwalze® special cast iron Ø 56 cm
    • Cat. 2 headstock for front mounting

  • DUPLEX® 45 folding

    • DUPLEX® Prismenwalze® special cast iron Ø 45 cm
    • Cat. 2 headstock for front mounting
    • Hydraulic folding to 2.80⁠–⁠3.00 m transport width

  • DUPLEX® 56 folding

    • DUPLEX® Prismenwalze® special cast iron Ø 56 cm
    • Cat. 2 headstock for front mounting
    • Hydraulic folding to 2.80⁠–⁠3.00 m transport width

Accessories 8 items

  • Cultivator tined unit3-row, 150 mm tine spacing, complete with side plates and carrier swing arm – fitted and removed with just 3 pins.Rigid types · 2.50 / 3.00 / 4.00 m · 15 to 25 tinescan be retrofitted at any time
  • FlatSpring, hydraulically adjustableRobust, can be set aggressively, ideal for levelling. Folding version with hydraulic angle adjustment, 2 × 2.00 to 2 × 3.00 m.DX 30-45 · DX 30-56 · all folding typesadditional 1 × DA spool valve
  • Front and rear scrapersFor extreme situations – for extended use in very wet conditions.All typescan be retrofitted
  • Double springs for the tined unitStrengthened tines with double leaf springs for the heaviest soils – factory-fitted or as a retrofit kit for self-assembly.Rigid types with tined unit
  • Marker boards with LED lightingFor front mounting with or without a front implement and for rear mounting. Rigid types for self-assembly, folding types factory-fitted.All types
  • Diverter blockMechanical, for the FlatSpring angle adjustment – saves a double-acting spool valve.Folding types with FlatSpring
  • Headstock extensionIncreases the distance between tractor and implement by 20 cm.Folding types
  • Steering hitch (front steering headstock)For heavy conditions.Folding typescannot be retrofitted

Standard equipment and accessories: as of 2026. Accessories and quotation from your GÜTTLER sales representative.

Configurator · DUPLEX®Live preview
GÜTTLER DUPLEX® 56 rigid with tined unit in the configurator side view

Illustration: DUPLEX® 56 rigid with tined unit · configurator view

Configurator

Your DUPLEX®. In four steps.

Choose the version and type, put together the front implement and accessories, and send your enquiry with your postcode directly to the responsible GÜTTLER sales representative.

  1. 01
    Version & type
    • Ø 45 | Ø 56
    • rigid · folding
    • 13 types
  2. 02
    Front implement
    • Cultivator tined unit
    • FlatSpring
  3. 03
    Accessories
    • Scrapers
    • LED marker boards
    • Steering hitch
  4. 04
    Enquiry
    • with postcode to the sales team

Price on request – quotation from your GÜTTLER sales representative – the contact responsible for your postcode will get in touch with you.

Your selection DUPLEX® 56 rigid

Configure DUPLEX®: DUPLEX® 56 rigid

Go to version

The Original Since 1978

Two Prismenwalze® rollers run in the DUPLEX®. The Original since 1978.

The Prismenwalze® is the roller with the golden hoofprint® – the original from GÜTTLER, since 1978. In the DUPLEX®, two prism rollers work with an offset, one in front of the other: they break up heavy plough clods, clean each other and leave coarse crumbs on top and fine soil in the seed zone.

Proven thousands of times over.

The Prismenwalze® principleThe whole story
The two offset DUPLEX® prism rollers in special cast iron, rendering

Downloads · 5 files

Brochure, flyer and operating manual.

All brochures and manuals

Videos

DUPLEX® in action.

Knowledge & practice

DUPLEX® in practice.

All practical tips
  • Tractor with Super Maxx® BIO during catch crop destruction in springSpring
    • Catch crops
    • Super Maxx® BIO

    Catch crop management in spring

    Let the soil dry first, then work shallow with the Super Maxx® BIO: narrow point or swept point – and no trailing roller.

    Practical tip · March 2024

  • MEDIANA 600 front-mounted with a monograin drill at the rearSummer
    • Seedbed
    • Front presses

    From harvest to sowing

    MEDIANA, MATADOR, AVANT and DUPLEX® at a glance – with practical benefits, flyers and videos.

    Practical tip · August 2024

Advice & dealers

Questions about the DUPLEX®?

We will advise you on the version, working width and front implement for your soils. Your GÜTTLER sales representative can also put you in touch with the sales partner near you.

DUPLEX® front pressDX 30-56 · 2.86 m
Configure: DUPLEX® 56 rigid