Popular searches

Configurator

04Knife roller · front-mounted

GÜTTLER® MASTERCUT 300 / 600 Knife roller

GÜTTLER MasterCut 600 knife roller, hydraulic folding, from the front at an angle – rendering 360° Tour with components
Working width
2.80 | 5.75m
Knife roller Ø
360mm
Knives per circumference
7
Transport width 600
2.81m

Chopping catch crops and crop residues properly.

High output, low power requirement, versatile – the knife roller for front mounting, 2.80 m rigid or 5.75 m hydraulic folding.

Configure MasterCut: MasterCut 600 Request advice

Priceon request – Quotation from your GÜTTLER sales representative – the contact responsible for your postcode will get in touch with you. Flyer · PDF, 3.3 MB

360° · tour

All the way round. Every component in its place.

GÜTTLER MasterCut 600 knife roller, hydraulic folding, rendering – front view at an angle

Drag, swipe or use the scale: the MasterCut rotates through 36 views. The pins follow the components and disappear as soon as a component is hidden.

Components · tap to rotate to them

  1. 1

    Knife roller

    Ø 360 mm · 7 knives per circumference

    28 helically arranged knives per roller segment cut the plants across the direction of travel – the soil acts as the counter-blade. The helical arrangement ensures smooth running.

    Knives
    8 × 90 × 700 mm
    per segment
    28 knives
  2. 2

    Levelling bar

    optional · lays the vegetation flat in the direction of travel

    It runs close to the ground, pushes catch crops and stems forwards and pulls them taut. This means the knives cut exactly across them – no second row of rollers is needed. The parallelogram linkage controls the gap to the ground and prevents blockages, and predetermined breaking points protect against overload.

    Width 300
    3.00 m
    Width 600
    6.00 m · 2 × 3.00 m
  3. 3

    Pendulum roller segments

    2 × 3.00 m U-folding · ± 3° ground contouring

    The roller trails, which keeps it on the ground. On the MasterCut 600, two 3.00 m segments hang in the folding frame on pendulum mountings and follow the ground by ± 3° – for even pressure across the entire working width. Rubber-sprung bearing plates dampen vibrations.

    Bearings
    4, greasable
    Suspension
    Rubber dampers
  4. 4

    Cat. 2 headstock

    for front mounting

    Sturdy, compact front mounting frame: the weight is distributed evenly across the entire working width – front weight that actively works in the field. With the weight carrier (optional), you can attach your own front weights; a headstock for rear mounting is available on request.

    Ballast 300
    max. 300 kg
    Ballast 600
    max. 900 kg
  5. 5

    Hydraulic folding

    2.81 m transport width

    The MasterCut 600 folds its two 3.00 m segments up hydraulically (U-folding) and travels on the road with a transport width of 2.81 m. Transport locks secure the wings, and folding is only possible with the machine lifted.

    Hydraulics
    1 × double-acting
    Height folded
    2.98 m
  6. 6

    Marker boards with LED lighting

    optional · factory-fitted

    Marker boards with LED lighting for road transport when front-mounted – factory-fitted on request. The lighting is connected to the tractor after hitching.

    Transport width 300
    3.00 m
    Transport width 600
    2.81 m

Renderings from GÜTTLER configurator data, 36 views at 10° each. Equipment depends on the configuration.

Benefits · 7 highlights

Cut, split, let it rot.

The GÜTTLER® MasterCut knife roller stands out for its high output, low power requirement and versatility. Combined with the Super Maxx® BIO, it incorporates catch crops and the stubble of oilseed rape, sunflowers and other crops perfectly.

Benefits in the field

  • Can be combined with the GÜTTLER Super Maxx® and the Prismenwalze® (prism roller)
  • Ideal for incorporating tall catch crops
  • Compact design for greater driving comfort
  • Front weight that actively works in the field

“The MasterCut 600 knife roller cuts the oilseed rape stems into small pieces and mixes them with the soil.”

GÜTTLER

Fewer corn borers. Faster decomposition.

  • Cleared mulch layer after the MasterCut: the vegetation lies uniformly in the direction of travel
    01 Cut

    High cutting frequency

    7knives per circumference

    Even in green catch crops and soft grass-clover leys: the vegetation lies uniformly in the direction of travel and nothing lies crosswise – in practice, the theoretical cutting length is largely achieved.

  • MasterCut 600 front-mounted on a tractor on a maize stubble field
    02 Smooth running

    Trailing knife roller

    The trailing arrangement keeps the roller on the ground. Rubber-sprung bearing plates dampen vibrations, and the helically arranged knives improve smooth running.

  • Wing of the MasterCut 600 with bearing plate and knife roller in the stubble field
    03 Ground contouring

    2 × 3.00 m pendulum

    ± 3°pendulum segments

    Good ground contouring and perfectly even pressure distribution across the entire working width.

  • Parallelogram-guided levelling bar in front of the knife roller of the MasterCut
    04 Front implement

    Levelling bar

    It pushes the vegetation forwards and pulls it taut. The parallelogram linkage automatically controls the gap to the ground and prevents blockages.

  • Maize stem cut cleanly through by the MasterCut, held in a hand
    05 Clean cut

    Stems cut cleanly through

    The MasterCut cuts the stems cleanly through or …

  • Split maize stems on the ground after the pass
    06 Corn borer

    … splits them open completely

    … so that they rot quickly and the corn borer cannot overwinter.

  • Short-cut oilseed rape stems in a hand after the MasterCut
    07 Oilseed rape

    Oilseed rape stems in small pieces

    The stems are chopped and mixed with the soil. They rot faster, and volunteer oilseed rape can germinate well.

Technology

Technical data. 300 and 600 compared.

Both versions side by side – technical data as of 2026, supplemented with values from the operating manual.

Technical data MasterCut 300 and 600
VersionMasterCut 300rigidMasterCut 600hydraulic folding
Working width2.80 m5.75 m
Transport width3.00 m2.81 m
Designrigidhydraulic folding · 2 × 3.00 m U-folding
Weight of basic machine750 kg1,930 kg
Knife roller Ø360 mm360 mm
Knives per circumference77
MountingCat. 2 headstock, front-mountedCat. 2 headstock, front-mounted
Hydraulic connections–1 × double-acting
Levelling bar (optional)3.00 m · 135 kg6.00 m · 270 kg
Knives per roller segment28 · 8 × 90 × 700 mm28 · 8 × 90 × 700 mm
Length · height1.68 m · 1.54 m1.70 m · 1.50 m (folded 2.98 m)
Ballast via weight carriermax. 300 kgmax. 900 kg
Bearings2, greasable, rubber dampers4, greasable, rubber dampers
Working speed12 to max. 15 km/h12 to max. 15 km/h

Knives, length/height, ballast, bearings and speed: MasterCut 300 | 600 operating manual, 2025. Technical data: as of 2026. Illustrations are not binding. Errors excepted, subject to technical changes.

MasterCut at work in oilseed rape stubble, dust behind the knife roller
ApplicationsStubble of oilseed rape, maize and sunflowers – and catch crops.

Versions · 2

Rigid or folding.

Same roller, same knives – the working width makes the difference.

GÜTTLER MasterCut 600 knife roller, hydraulic folding, rendering

hydraulic folding

MasterCut 600

  • 5.75 m working width
  • 2.81 m transport
  • 2 × 3.00 m U-folding

For large areas: two 3.00 m pendulum segments in the folding frame, folded hydraulically to 2.81 m transport width.

View in 360° Configure
GÜTTLER MasterCut 300 knife roller, rigid, rendering

rigid

MasterCut 300

  • 2.80 m working width
  • 3.00 m transport
  • rigid

Compact and rigid: one roller segment, 2.80 m working width with 3.00 m transport width.

View in 360° Configure

GÜTTLER® modular system

Cut at the front. Mix and sow at the rear.

As a front-mounted knife roller, the MasterCut combines very well with other implements. Following behind, the Super Maxx® spring-tine cultivator or the Matador Prismenwalze® with tine section mixes the organic residues with the soil and promotes decomposition, while emerged weeds are controlled – and with the seeder, the winter green cover is sown at the same time.

MasterCut front-mounted, Super Maxx Culti rear-mounted on a tractor
01Combination

With Super Maxx® Culti

6 m working width, tine section with 5 rows of tines, Synthetic Ultra prism roller and seeder: professional green cover and corn borer control in a single pass.

View Super Maxx® CULTI

MasterCut front-mounted, MATADOR with seeder rear-mounted on a tractor
02Combination

With MATADOR

The Matador Prismenwalze® with tine section in front and seeder – popular with customers as a combination for corn borer control and winter green cover.

View MATADOR

Configurator · MASTERCUTLive preview
GÜTTLER MasterCut 600 from the front at an angle, rendering

Illustration: MasterCut 600 · rendering

Configurator

Your MasterCut. In three steps.

Choose the version, put together the accessories and send your enquiry with your postcode directly to the responsible GÜTTLER sales representative.

  1. 01
    Version
    • MasterCut 300 · rigid
    • MasterCut 600 · folding
  2. 02
    Accessories
    • Levelling bar
    • Weight carrier
    • LED marker boards
  3. 03
    Enquiry
    • with postcode to the sales team

Price on request – quotation from your GÜTTLER sales representative – the contact responsible for your postcode will get in touch with you.

Configure MasterCut 600 Configure MasterCut 300

The Original Since 1978

Made by GÜTTLER®. Designed as part of the system.

Since 1978, GÜTTLER has been developing machines for good soil structure – starting with the Prismenwalze®. The MasterCut extends the modular system at the front: it chops what the Super Maxx® spring-tine cultivator or the Matador Prismenwalze® then mix with the soil and reconsolidate.

The whole story
MasterCut front-mounted, with Super Maxx behind, in evening light on the stubble field

Equipment

Standard and optional equipment.

What every MasterCut comes with from the factory – and how you can equip it in the configurator.

Standard equipment 4 items

  • Cat. 2 headstock for front mounting
  • Parking stand
  • Knife roller Ø 360 mm
  • 7 knives per circumference

Accessories 4 items

  • Levelling bar, complete with holderLays the plants flat in the direction of travel and pulls them taut – no second row of rollers needed. 3.00 m (MasterCut 300) or 6.00 m (MasterCut 600).Accessories
  • Marker boards with LED lightingFor front mounting, factory-fitted.Accessories
  • Weight carrierFor attaching your own front weights: max. 300 kg (MasterCut 300) or 900 kg (MasterCut 600).Accessories
  • Headstock for rear mountingFor MasterCut 300 and 600 on request.Accessories

Standard equipment and accessories: as of 2026; max. ballast according to the operating manual. Accessories and quotation from your GÜTTLER sales representative.

Downloads & video

Flyer, manual, applications.

All brochures and manuals

Frequently asked questions

Good to know.

How fast can I work with the MasterCut?

When front-mounted, 12 to a maximum of 15 km/h is permitted in the working position. The knife roller is lifted for turning; folding is also only possible with the machine lifted.

Can I attach my own weights?

Yes, via the weight carrier: up to 300 kg on the MasterCut 300 and up to 900 kg on the MasterCut 600. Ballasting via the tractor hydraulics is not permitted.

Which hydraulic connections does the MasterCut need?

The MasterCut 600 needs one double-acting spool valve for hydraulic folding. The MasterCut 300 is rigid.

How do I adjust the levelling bar?

Raise or lower it with the tool supplied and secure it with the linch pins – depending on the vegetation, so that the bar runs above the ground. If possible, do not adjust by more than two holes per side.

What can the MasterCut be combined with?

Proven combinations are the Super Maxx® Culti with tine section, Synthetic Ultra prism roller and seeder, or the Matador Prismenwalze® with tine section and seeder – chopping, incorporating and establishing green cover in a single pass.

Is the MasterCut also available for rear mounting?

Yes – a headstock for rear mounting is available for the MasterCut 300 and 600 on request.

Advice & dealers

Questions about the MasterCut?

We will advise you on the version, combinations and use on your fields. Your GÜTTLER sales representative can also put you in touch with the sales partner near you.

MASTERCUT Knife roller300 rigid · 600 folding
Configure: MasterCut 600