Company · Kirchheim unter Teck

Leading in soil structure. Since 1978.

Convincing agricultural machinery for crop production from Kirchheim unter Teck – a family business that stands for quality, innovation and customer satisfaction.

Drone shot from above: tractor with a red front-mounted GÜTTLER MEDIANA Prismenwalze® and a rear-mounted seed drill in the field
The Prismenwalze® (prism roller) in action
The Prismenwalze®
1978
GÜTTLER GmbH founded
1981
Locations in DE and HU
3

Philosophy

One idea. Since the very first roller.

“Effective soil cultivation that also protects the precious soil structure.”

This idea runs like a common thread through our company history: from the development of “the roller with the golden hoofprint®” and the GreenMaster range for professional grassland maintenance and overseeding through to the Super Maxx® spring-tine cultivators.

In every case, this also means excellent mechanical weed control. This is valuable not only for organic farms – it also helps in general to tackle increasing herbicide resistance effectively and to reduce the use of chemicals.

  • GÜTTLER GreenMaster maintaining grassland in hilly terrain
    02Grassland

    Grassland maintenance and overseeding – essential for economical meat and milk production.

  • Super Maxx® 1200-7 BIO in action
    03Spring-tine cultivators

    All-season implements: seedbed preparation after plough and cultivator, slurry incorporation, shallow, water-saving stubble cultivation.

Fritz Güttler’s invention · The Prismenwalze®

Firm below. Loose and crumbly on top.

Fritz Güttler is looking for a roller that reliably cleans itself and, above all, matches his idea of an ideal seedbed. The widely used Cambridge rollers are out of the question because they literally iron the seedbed “smooth”.

The Original Since 1978

1978

Logo: sheep with a red prism ring – “The roller with the golden hoofprint®. The Original. Since 1978”Logo : mouton et anneau prismatique rouge – « Le rouleau au piétinement de moutons. L’original. Depuis 1978 »
The first patented GÜTTLER roller, Ø 32/35 cm – the beginning of the Prismenwalze®.
Firm below – loose and crumbly on top
Seed placement on a firm seed zone with capillary water flow.
Fine soil below – coarse crumbs on top
Fine soil in the seed zone, coarse crumbs on top to protect against capping and wind erosion.

Despite many setbacks, he does not give up and, with the patented Prismenwalze®, develops a completely new type of roller. At first, he often meets with incomprehension – today, “reconsolidation” has long been taken for granted. The granting of several international patents proves that the GÜTTLER roller is an invention in its own right and not merely an improvement on existing designs.

Five generations of prism rings · 1978–1999

  1. Prism ring 1978: first patented roller 1978 First patented roller Ø 32/35 cm
  2. Prism ring 1984: dish shape without spokes 1984 Dish shape without spokes Square-shaft drive
  3. Prism ring 1993: second generation 1993 Second generation “progressively” rounded
  4. Prism ring 1995: Synthetic Ultra 1995 Synthetic Ultra almost 50% lighter
  5. Prism ring 1999: divided, special cast iron 1999 Divided, special cast iron Ø 56 cm

History · 1956–2026

Pioneering work. From 1956 to today.

From Fritz Güttler’s beginnings in agricultural engineering and the Prismenwalze® to the 2026 innovations – with archive photos from the company album.

1956–1976 From the shallow seedbed to reconsolidation

  1. 1956

    Light, warmth, air and water

    A seed needs light, warmth, air and water to grow. This knowledge shapes Fritz Güttler, a farmer’s son, when he starts work at a well-known agricultural machinery factory in 1956. Trained as an agricultural technician and businessman, he initially looks after Bavaria and Austria; in 1959 he becomes sales manager for Germany and Austria.

    Sketch: seed in the soil with warmth, air and water
  2. 1960

    Shallow instead of deep

    Around 1960, Fritz Güttler sets out his principle: “Prepare the seedbed evenly and shallow in spring – do not loosen deeper than you want to sow.” As sales manager, he spreads the word. Shallow seedbed preparation catches on and becomes standard.

    Sketch: seedbed “Not like this …” with seeds placed at uneven depths, “… but like this!” with even, shallow placement
  3. 1972

    Starting his own business

    Fritz Güttler gives up his position as sales manager and sets up his own business. With the GAREG, he develops a seedbed combination that is far ahead of the market: parallelograms and crumblers guide the tools reliably at the required working depth. The compact GAREG is available with working widths of 3 and 5 metres – and can be combined with any existing seed drill.

    Historical photo: GAREG seedbed combination with seed drill on a tractor, 1972Archive · 1972
  4. 1976

    GAROMAT – 12 metres

    With the 12-metre GAROMAT, the widest seedbed combination in Europe at the time is born. From 1973 to 1980, the company Schmotzer holds a licence from Fritz Güttler.

    Historical photo: GAROMAT 12-metre seedbed combinationArchive
  5. 1976

    A change of thinking

    Structural change in farming accelerates: farms grow, tractors become bigger and heavier and leave wheel ruts that make very shallow work difficult. Fritz Güttler’s conclusion: loosen as deep as necessary to level the tractor wheelings – and then reconsolidate. This makes him the pioneer of reconsolidation.

1978–1999 The Prismenwalze® and its generations

  1. 1978

    The Prismenwalze®

    The first patented GÜTTLER roller, Ø 32/35 cm. Several international patents confirm it: an invention in its own right, not merely an improvement.

  2. 1981

    Güttler GmbH is founded

    To support further growth, Fritz Güttler brings his son Hans into the company. The senior continues to look after engineering and development, while Hans Güttler takes over management and sales. His wife Gisela organises finance, other commercial areas and advertising.

    Historical GÜTTLER logo “Kompetent fürs Saatbett” (expertise for the seedbed) on a yellow backgroundArchive · 1981
  3. 1984

    Dish shape without spokes

    The prism rings are changed to a dish-like shape without spokes. For the first time, square shafts positively drive all roller rings on some types.

  4. 1993

    The second generation

    The Prismenwalze® with “progressively” rounded valleys is patented – and becomes a worldwide success.

  5. 1995

    Synthetic Ultra

    Do rollers have to be heavy? GÜTTLER says “No”: prism rings made of light, hard-wearing Synthetic Ultra – almost 50% less weight with high break resistance. This takes the strain off tractor, implement and soil. For power harrows, there is the Simplex Prismenwalze® in a cast iron or Synthetic Ultra version.

  6. 1996

    Güttler KFT, Hungary

    Güttler KFT subsidiary founded in Hódmezővásárhely, Hungary – today it manufactures the OffSet, Master and Magnum trailed rollers, all hydraulic folding front implements and the Super Maxx® series.

    Güttler KFT factory building in HungaryArchive · 1996
  7. 1999

    Prism rings Ø 56 cm

    The divided version made of break-proof special cast iron is clamped onto the solid shaft (140 × 140 mm tube) without play using four bolts – no wobbling, no wearing out, and easy to repair in the event of a breakage.

2005–2026 Grassland, Super Maxx® and new tools

  1. 2005

    GreenMaster and Mayor

    The arable specialist moves into grassland as a “newcomer”: the heart of the GreenMaster is the GÜTTLER roller with the “golden hoofprint”, combined with the robust HarroFlex harrow – the first grassland harrow that can effectively rid grassland of rough meadow-grass (Poa trivialis). In the same year, the Mayor roller with transport wheels is launched.

    First GreenMaster at work on grassland maintenance, 2005Archive · 2005
  2. 2007

    A machine without a roller

    Of all companies, the roller specialist presents the Super Maxx® without a roller: after cultivation the soil is left to air, and reconsolidation only takes place at sowing – so no smeared zones form in the seedbed. Twice the work rate, half the fuel consumption.

    First Super Maxx® spring-tine cultivator on a tractor, 2007Archive · 2007
  3. 2013

    Agritechnica innovations

    The GreenSeeder®: HarroFlex harrow with mounted seeder, used solo or combined with Mayor and Master rollers – for arable farming and grassland. Plus the Super Maxx® in 10 and 12 metres.

    Two photos: GreenSeeder® with mounted seeder on a tractor on grassland, and Super Maxx® with a 12-metre working width in the field
  4. 2019

    Two world firsts

    Super Maxx® 90-5 / 90-7 BIO for the three-point linkage and the GreenMaster TINE SEED.

    Two posters “GÜTTLER world first”: GreenMaster TINE SEED for professional grassland maintenance, and Super Maxx® 90-5 and 90-7 BIO mounted on the three-point linkage
  5. 2023

    New tools, new sizes

    Magnum 1560, MasterCut 600 knife roller, forged and precision points for the Super Maxx®, the GreenMaster facelift and the SeedProfi control terminal.

    GÜTTLER MASTERCUT 600 knife roller, cut-out
  6. 2024

    Hydraulics and seed tank

    Super Maxx® BIO with new hydraulic adjustments; Mayor with seed tank for efficient catch crop sowing.

    GÜTTLER Super Maxx® BIO spring-tine cultivator, cut-out
  7. 2025

    Setting the course for the future

    Güttler GmbH is setting the course for the future: for a year now, Tobias Wachtstetter has been a second Managing Director with equal rights, and he will succeed Hans Güttler – according to the press release of 31 July 2025.

  8. 2026

    Innovations 2026

    Super Maxx® Heavy Duty and CultiSem, the PrimusPlus 300 heavy cultivator, and GreenMaster EcoLine and Compact.

    GÜTTLER Super Maxx® Heavy Duty, cut-out

Pioneers

Two generations of Güttler.

The inventor and the entrepreneur – and today a dual leadership that combines tradition and modernity.

Portrait of Fritz Güttler, roller pioneer and inventor of the Prismenwalze®

Fritz Güttler

Pioneer and inventor

“For seedbed preparation in spring, you must work shallow and must not disturb the water-carrying capillaries!”

His motto from 1960

From 1960, as sales manager of a well-known machinery factory, Fritz Güttler spread this motto – generations of farmers grew up with it. In 1976, he became convinced that in future it would be necessary to work deeper and then reconsolidate. This is how he became the pioneer of reconsolidation.

“Loosen only as deep as is necessary to level out the tractor wheelings. Then reconsolidate to restore the capillary water flow.”

His conclusion in 1976

Pioneer of reconsolidation

  1. 1978The first patented GÜTTLER roller – a tool for the ideal soil structure in the seedbed.
  2. 1993The second generation of the Prismenwalze® becomes a worldwide success.
  3. 1995The first roller made of plastic – a revolution.
Portrait of Hans Güttler, Managing Director

Hans Güttler

The entrepreneur · Managing Director

“We count on you – and we keep working on the best possible solution.”

In 1981, Hans Güttler takes over management and sales of the newly founded GmbH. With him, the company continues to grow:

With him, the company grows

  1. 1997The harrow for the Magnum
  2. 2000Grassland maintenance
  3. 2001The Master series
  4. 2005The Mayor roller with transport wheels · the GreenMaster system
  5. 2007The Super Maxx®, gentle on the soil
  6. 2013The GreenSeeder
  7. 2014The GreenManager for fruit growing and viticulture
  8. 2015The RollFix
  9. 2017Super Maxx®, 7-row
  10. 2023New Magnum 1560 · forged and precision points for the Super Maxx® · MasterCut 600 knife roller · GreenMaster facelift · SeedProfi control terminal
  11. 2024Super Maxx® BIO with new hydraulic adjustments · Mayor with seed tank for efficient catch crop sowing
Tobias Wachtstetter (left) and Hans Güttler in front of a GÜTTLER machine in the field
© Güttler GmbH

Today: dual leadership

Tobias Wachtstetter manages Güttler GmbH together with Hans Güttler as a second Managing Director with equal rights and will succeed him. He focuses on sales, human resources, culture and strategy; Hans Güttler concentrates on technical development.

Read the press release

Our quality standard

What makes us tick. The roller pioneer from southern Germany.

GÜTTLER Super Maxx® with mounted seeder on a tractor, cultivating a field

We are not just machine builders. You and your crop production requirements come first. Because we know what matters agronomically, we can develop the right technical solutions. And results like these can only be achieved if you live and love what you do and are never satisfied with what you have achieved.

This attitude has shaped our company history. For us, sustainability also counts in our relationships with others – be they employees, suppliers or customers.

Sustainability – in two senses

  • Protecting soils

    Protecting and preserving the structure and fertility of your soils.

  • Building to last

    Building robust machines with the longest possible service life and high utility.

Looking to tomorrow

Reason enough to focus on “soil structure” – and therefore reason enough for GÜTTLER.

The farming of the future faces enormous challenges: increasingly extreme weather, growing resistance to crop protection products and increasing interference from politics and public opinion.

This forces changes in the way farms are run: cutting costs and increasing revenue – while farming sustainably and protecting the soil. Your soil is your most valuable asset. After all, you want to pass it on to the next generation.

Locations

Development, training, manufacturing. Germany and Hungary.

  • Aerial photo of the GÜTTLER headquarters in Kirchheim unter TeckHead office

    Güttler GmbH · DE

    Kirchheim unter Teck

    Karl-Arnold-Straße 10 · 73230 Kirchheim/Teck · Germany

    Güttler GmbH’s central administration is in Kirchheim/Teck. This is where development, marketing, sales, purchasing, finance and central customer service are based. The development workshop deals exclusively with custom builds, small series and prototypes.

  • Güttler GmbH training centre in AmerdingenTraining centre

    Güttler GmbH · DE

    Amerdingen

    86735 Amerdingen

    Our training centre is in Amerdingen. GreenMaster machines and Mayor trailed rollers are also assembled and shipped from here. We look forward to welcoming you in person to a free course at the training centre – please arrange an appointment in advance.

  • Aerial view of the Güttler KFT plant in Hódmezővásárhely, HungaryManufacturing · since 1996

    Güttler KFT · HU

    Hódmezővásárhely

    Southern Hungary, near Szeged

    Today, the subsidiary Güttler KFT manufactures the OffSet, Master and Magnum trailed rollers, all hydraulic folding front implements and the complete Super Maxx® series with working widths from 3 to 12 metres.

Press

News from Kirchheim.

Press releases, press contact, press kit and articles in the trade press – in the press area.

Careers

Want to join the team?

Working at GÜTTLER in Kirchheim unter Teck, Amerdingen and in field sales: speculative applications are welcome at any time.