Super Maxx® Heavy Duty

Particularly robust and precise large spring toothed harrow for large farms and contractors with higher loads and more intensive use.

TECHNOLOGY

Super Maxx® Heavy Duty
SuperMaxx® Heavy Duty

The new large-spring tooth harrow combines the unsurpassed advantages of the classic Super Maxx® Bio with a heavy cultivator.

Heavy Duty in:
6.0 I 7.0 meters hydraulically foldable
7-bar

Thanks to its solid construction, the robust linkage guide for depth adjustment and up to eight feeler wheels for excellent contour adjustment, the
Cultivator for the toughest conditions and high acreage output.

  • Hydraulic working depth adjustment as standard – convenient and precise adjustment directly from the cab
  • Optional hydraulically adjustable harrow – for optimum adaptation to different soil conditions and tillage intensities
  • Up to eight feeler wheels enable precise depth control across the entire working width – for uniform work results even under
    changing conditions

Precision meets professional
The Super Maxx® HD combines throughput, precision and durability – making it the ideal solution for operations with the highest demands and maximum capacity utilization.

Gentle on the ground:

  • Flat, water-saving stubble cultivation with huge area output and moderate fuel consumption
  • Effective mechanical weed control and regular “weed cures” by creating a “false seedbed” and repeated shallow cultivation
  • damp floors before ordering and allow to flash off first. Afterwards, the order can be carried out in a way that is gentle on the ground!
  • In dry conditions – save water I In wet conditions – aerate to protect the soil
Super Maxx® 60 - 7 BIO - 7-bar, large passageway

Soil-friendly: water-saving stubble cultivation, even on dried-out, hard soils

A shallow stubble cultivation repeated several times, preferably immediately after the combine.

  • creates a thin layer of mulch from soil, stubble and straw. This prevents the evaporation of valuable soil water.
  • the greenhouse climate under this layer of mulch
    • allows volunteer cereals and weeds to emerge quickly.
    • keeps the soil life (e.g. earthworms) going
  • during the next operation, the emergence is mechanically destroyed (goosefoot coulter 200 mm as an option)
  • no stool is buried, rather it is decomposed close to the surface by the active soil life.

Comparing the Super Maxx® to the conventional heavy cultivator you will notice

  • double area output
  • half fuel consumption (approx. 5 liters/ha)
  • Two passes with the Super Maxx® cost you no more time and money than one pass with the classic heavy cultivator, and with better results!
Weed control using the example of a still ley area.

Gentle on the soil: effective mechanical weed control

Effective mechanical weed control:

  • The Super Maxx® loosens the weeds from the soil.
  • The harrow frees the root system from adhering soil.
  • The weeds dry up and die quickly.

This enables regular “weed cures” on a predominantly mechanical basis. Subsequent herbicide treatment becomes more successful. In this way, you avoid the formation of resistance in conventional farming. In organic farming, this lays the foundation for the later use of the harrow or hoe!

Effective mechanical weed control with large area performance and moderate fuel consumption.

Support wheels at the front determine the working depth - the tractor upper link keeps the implement in balance!

Gentle on floors: Pull up damp floors and allow to flash off!

Often we have to deal with too wet soils. Whether in early spring on silt-rich soils that dry poorly, in the absence of winter tillage, or mulch seeding in the fall when soils no longer dry. In these cases, it would be advisable to open the floor first so that it can ventilate. Reconsolidation takes place during seeding, when the soil has dried, with a front roller from GÜTTLER®. The clods break along their live obstructions. Result: stable soil structure, ideal gas exchange, rapid soil warming. In short, an ideal seedbed!

Gentle on the ground: light tractors with moderate front ballast

The innvovative concept without roller

  • allows the use of light tractors
  • gets by with moderate front weights
  • makes you fast and agile on the wall!
  • protects the tractor and your valuable soils!

In this example: The lightweight 4-cylinder tractor manages without front weight with the Super Maxx® 30 – 7 BIO!

The double leaf spring doubles the resistance of our tines 45x12 mm. So they correspond to spring tines of dimension 90x12 mm!

Tines 70x12 or 45x12 with double leaf spring???

We use tines of dimension 45×12 with double blade suspension with progressive characteristic!

The resistance of tines in comparison:

  • Dimension 45×12 mm alone = 100%
  • Dimension 70×12 mm = 156
  • Dimension 45×12 + double leaf spring = 200 %!!!
  • The double leaf spring also gives the tines lateral support!

Our tines convince with their progressive charateristics:

  • When working flat, they generate a lot of fine earth with high-frequency vibrations
  • With deep machining up to a maximum of 15 cm, they have the necessary stability, even laterally!

They have proven themselves in considerable numbers since 2007! Also on hard, dried clay soils as well as under stony conditions!

  • Narrow line spacing of only 13 cm
  • Ground clearance under the tine array 56 cm
The Super Maxx® tines crack even hard soils

The Super Maxx® masters even dried-out, hard soils!

The Super Maxx® tines have a strong self-traction due to their narrow coulters and their position directed towards retraction. This means that the Super Maxx® does not have to weigh a lot to be able to reliably pull into tightly packed floors. Even in the extreme summers of 2018 and 2019, with their often enough concrete-hard dried-out soils, the Super Maxx® never let us down! The tines go working depths up to 15 cm at any time!

Güttler Super Maxx® BIO now with new hydraulic functions

Güttler is now offering hydraulic adjustment of the harrow and working depth as additional equipment for the Super Maxx® BIO series. The working depth of the Super Maxx® large spring toothed harrows is adjusted using support wheels. This now works hydraulically and is very easy to do from the driver’s seat. The best weed control effect is achieved when the harrow is optimally adjusted. The support wheels for hydraulic adjustment of the working depth and a working depth indicator are located at the front. The hydraulic cylinders, which hydraulically adjust the two harrow tine rows, are mounted at the rear. With the narrow double spring tines, the vibration at the tip of the tine is higher than with single spring tines. This allows the Super Maxx® to penetrate the soil more quickly, even in dry conditions. The harrow levels, creates fine soil and also deposits the weeds on the soil surface so that the roots and plants can dry out quickly.

TECHNICAL DATA

Super Maxx® Heavy Duty
TypArbeitsbreiteTransportbreiteGewicht
Super Maxx® 60-7 HD
Super Maxx® 70-7 HD

* Observe the permissible axle loads of the tractor! The auxiliary landing gear is required for driving on public roads.

In terms of pure tractive effort, there is no difference between the 5- and 7-bar Super Maxx® , as the number of tines is identical. A 100 hp tractor will therefore pull a Super Maxx® 50 – 7 BIO as well as a 50-5 BIO. While he can safely handle the 5-beam unit with moderate front ballast, much more front ballast could be required on the 7-beam Super Maxx® due to its longer overall length. For reasons of soil protection, we therefore recommend selecting a tractor one size larger for the 7-beam Super Maxx® than for the 5 beam of the same width.

Standard equipment

  • Reinforced front swingarm support wheels 195/55 R10
  • Harrow with tines Ø12 mm
  • Hydraulic depth adjustment
  • 1st harrow row mechanically adjustable
  • Warning signs with LED lighting
  • Tine field recess for 4 support wheels at the rear for optimum ground tracking and contour guidance with ultra-flat cultivation

OPTIONS

Super Maxx® Heavy Duty

Overview of GÜTTLER® Super Maxx® coulters

1. narrow coulter 60 mm

2. carbide – narrow blade 36 mm

3. new carbide – narrow blade 55 mm

4. goosefoot share 200 mm

5. forging blade 200 mm

6. precision coulter 200 mm

CARBIDE NARROW BLADE 55 MM

NEW

CARBIDE NARROW BLADE 55 MM

  • New wider narrow share with carbide tip
    Improved mixing effect
  • Better loosening of the soil
  • More fine soil
  • Up to 8 times the service life
Goosefoot coulter 200 mm

For effective weed control – full-area cutting of weeds and volunteer oilseed rape and volunteer cereals.

  • As soon as something green appears: For full-area weed control after the first stubble cultivation has been completed
  • With a 200 mm goosefoot share, you have an enormous overcut of 70 mm

Especially for mechanical weed control.

NEW! Crumbler roller

NEW

SUPER MAXX® BIO - CRUMBLER ROLLER

  • Additional equipment crumbler roller for Super Maxx® from 3 to 7 m working width.
  • Subsequent crumbling during seedbed preparation.
  • Can be retrofitted to all Super Maxx® by exchanging with a harrow row.
  • Flexible use with 2 harrow rows or combination of crumbler roller and harrow row

Second row harrow

  • perfect leveling
  • even better straw distribution
  • even more effective in weed control
  • Can be retrofitted at any time

PICTURES

Super Maxx® Heavy Duty

VIDEOS

Super Maxx® Heavy Duty
[elfsight_youtube_gallery id="11"]

DOWNLOADS

Super Maxx® Heavy Duty
Schar-Fibel zum Super Maxx®Schmiedeschare Präzisionsschare zum Super Maxx® FlyerSuper Maxx®90-5 BIO / 90-7 BIO FlyerSuperMaxx® CULTI + BIO FlyerSuper Maxx® BIO – Das bodenschonende Konzept Edition 5- und 7- balkig DIN A4Betriebsanleitung SuperMaxx® BIO/CULTI 5-balkig/7-balkig (4-sprachig)

First-class stubble cultivation, favorable price A customer report from the John family from Eiken (CH)

We have made high demands on our new soil tillage machine. Efficient and high-performance stubble cultivation was just as important to us as working the desired working depth in both wet and dry conditions.

With the Super Maxx® large spring tooth harrow from GÜTTLER® we have found the optimal machine.

The 5 meter wide machine fits perfectly with our 100 hp tractor. The performance is ingenious with up to 3.5 ha/h. We drive a working depth of 7 to 15 cm, which can be precisely adjusted via the support wheels at the front of the machine.

Due to the tine distribution over the five beams, the machine never clogs even when stubble cultivating under our conditions and leaves a level and fine crumbly soil structure.

All three of us are excited about the concept of no trailing. No sticking, low machine weight and very good mechanical weed control. The soil dries excellently and retains its structure.

We can subsequently work faster and less deeply with the saw combination and thus save costs. And what’s great: the narrow transport width (only 2.40 m) and the extremely easy and safe parking position of the machine.

The advantages over a disc harrow or a cultivator? Quite clearly, working with the Super Maxx® is trouble-free even in damp conditions. It is ideal for use on slopes because there is no displacement of material. In addition, it has greater power with a smaller tractor. And all this at a sensational price / performance ratio.

John family from Eiken (CH) with Remo, Hans and Mario f. l. t. r.
Cookie Consent with Real Cookie Banner